Heater Core Hose Support for 4.0 & 2.5L Jeep engines
from $9.00
You’ve probably broken one of these on your vehicle, if you ever had one at all. This clip secures your heater core hoses to the valve cover stud, keeping them from rubbing against other components or straining your plastic valve. The originals are easy to misplace when servicing your cooling system or replacing a valve cover gasket, and are no longer produced. Ours is designed based on factory parts for rapid manufacturing, and made from extra tough carbon fiber filled nylon (PA6-CF20) to resist the heat and chemicals of your engine bay, with a friction fit to the stud.
There are 2 sizes, pre-96 (2 hoses are the same size) and 97+ (larger top hose). The firewall facing side of each is marked ADW and A/B for our identification. Pre-96 replaces pn: 5503533321 97+ replaces pn: 55035933
Community update! The pre-96 replaces the similar clip on the Jeep JK/JKU 3.8 engines that is prone to breaking and only available with a full hose kit. Thanks to clank_JK on IG for the heads up!
Material info:
Flame Retardancy - UL 94 Heat Deflection temp - 343 °F / 173 °C Decomposition temp - 835 °F / 446 °C
Each package contains: 1 Hose Support Sticker
May fit other Jeeps, community confirmed to fit XJ, MJ, TJ, ZJ and WJ. Let us know your uses so we can update. As always, designed and made here in the USA.
Ships either standard ground or priority USPS, your choice.
Choose:
You’ve probably broken one of these on your vehicle, if you ever had one at all. This clip secures your heater core hoses to the valve cover stud, keeping them from rubbing against other components or straining your plastic valve. The originals are easy to misplace when servicing your cooling system or replacing a valve cover gasket, and are no longer produced. Ours is designed based on factory parts for rapid manufacturing, and made from extra tough carbon fiber filled nylon (PA6-CF20) to resist the heat and chemicals of your engine bay, with a friction fit to the stud.
There are 2 sizes, pre-96 (2 hoses are the same size) and 97+ (larger top hose). The firewall facing side of each is marked ADW and A/B for our identification. Pre-96 replaces pn: 5503533321 97+ replaces pn: 55035933
Community update! The pre-96 replaces the similar clip on the Jeep JK/JKU 3.8 engines that is prone to breaking and only available with a full hose kit. Thanks to clank_JK on IG for the heads up!
Material info:
Flame Retardancy - UL 94 Heat Deflection temp - 343 °F / 173 °C Decomposition temp - 835 °F / 446 °C
Each package contains: 1 Hose Support Sticker
May fit other Jeeps, community confirmed to fit XJ, MJ, TJ, ZJ and WJ. Let us know your uses so we can update. As always, designed and made here in the USA.
Ships either standard ground or priority USPS, your choice.
Image 1 of 10
Image 2 of 10
Image 3 of 10
Image 4 of 10
Image 5 of 10
Image 6 of 10
Image 7 of 10
Image 8 of 10
Image 9 of 10
Image 10 of 10
